A custom reach-in closet in Calgary lands between $1,000 and $2,500. A standard walk-in runs $2,500 to $5,000. Closets in Calgary usually come from one shop, and shower glass and mirrors from another, which catches a lot of people out mid-renovation.
We created this resource to map that market in one place: who is operating in 2026, what each company does, and the numbers you need to sanity-check a quote. Nobody pays us anything, we sell nothing, and we have not hired any of these shops ourselves, so read this as a shortlist to start from rather than a ranking.

| Company | Focus | Since | Showroom | Feature |
|---|---|---|---|---|
| Calgary Custom Closets | Closets, storage | 2003 | Weekdays | Publishes real prices online |
| STOR-X Organizing | Closets, storage | 1989 | By appt. | Manufactures in Richmond BC |
| Hi-Tech Closets | Closets, storage | n/a | By appt. | Made in Calgary, public price guide |
| Cascade Glass | Shower glass, mirrors | 60+ yrs | Yes | No automotive glass |
| Regal Shelf & Mirror | Glass and shelving | 25+ yrs | Yes | Does storage and glass together |
| CJ Glass & Mirror | Shower glass | 1998 | Yes | Strong builder and renovator channel |
| House of Mirrors | Mirrors, frames, glass | 30+ yrs | Yes | Custom framing under one roof |
| Specialized Garage | Garage only | 2007 | n/a | Motorised overhead racks |
| Garage Living Calgary | Garage only | 2005 | Yes | Overhead racks rated to 600 lb |
Several Calgary companies build custom closets, closet organizers, pantry systems and garage storage.
Working since 2003 on closets, home offices, pantries, laundry rooms, garage storage, wall beds and cabinetry. BBB accredited with an A plus rating, and they back the work with a limited lifetime warranty. Mostly melamine, which keeps prices reasonable and gives plenty of finish options. What we like most is that they publish sample layouts with real prices instead of holding numbers back until someone is standing in your bedroom. The catch: weekday hours only, showroom included, so nobody working a standard week gets an easy visit.
Founded in 1989 by Wolf Nickel and now covering closets, garages, pantries and mudrooms across western Canada. Free in-home consultation with 3D design software, and they cut to order to keep off cuts down. One thing worth knowing before you call: manufacturing happens at their Richmond, British Columbia factory, not in Alberta. That is not a problem in itself, but if a panel arrives damaged or a measurement is off, the fix travels further than it would with a local shop.
Manufactures in Calgary and installs with its own team, so design, production and install stay under one roof. Like Calgary Custom Closets, they publish a pricing guide rather than treating cost as a secret, and they put walk-in starting points around $3,000. Worth a call if you want local manufacturing and a straight answer on budget early.
Also operating and worth a look if the three above are booked out: Unique Storage & Organizers, a family-run shop covering closets, laundry rooms and garages.
Shower doors and mirrors in Calgary come from glass shops, not closet companies, and the two trades run on separate schedules. Here is where each of these four differs.

Six decades in Calgary, with a showroom at 515 42 Avenue SE. They cover framed and frameless shower doors, custom glass and mirrors, and offer free estimates on most jobs. On the frameless side you can specify 10mm glass with protective coatings such as ShowerGuard or Endurshield, or high-clarity Starphire if you want the green edge tint gone. Mirrors come in 3mm and 5mm, typically fixed with clips and silicone. They do not touch automotive glass, so this is residential and commercial only.
More than 25 years supplying and installing custom shower doors, mirrors and shelving for homeowners, builders and renovators. They are the closest thing on this list to a single-stop option, since storage and glass usually mean two separate contractors and two separate schedules. If you are doing a closet and an ensuite in the same renovation, that alone can save you a few weeks of coordination.
Running since 1998 under owner John DeRaaf, focused on custom and frameless shower doors and enclosures. Their strength is the builder channel, manufacturing, delivering and installing for new home builders and renovators, and they cover the wider region including Cochrane, Okotoks, Airdrie and High River. If your home is new construction and the builder handed you a glass allowance, this is the type of shop behind it.
Thirty years in the trade, covering mirrors, custom framing and frameless shower doors. The framing side is what sets them apart: most glass shops will cut you a mirror, far fewer will build a frame for it in the same visit.
Two more shops worth knowing: AC Glass and Mirror, which adds glass railing and pattern glass inserts, and Glass Pro Install, which covers railings, glass walls and mirrors alongside showers.
If you need slatwall, garage shelving, overhead racks or tire storage, a garage specialist will serve you better than a closet company.
Garage work only, which shows in the range: slatwall, fixed storage racks, motorised overhead racks, heavy-duty tire racks, overhead hoists and folding counters. Their slatwall is extruded PVC, waterproof and scuff resistant, and installs into wall studs so hooks and shelves can be moved around later. The motorised Onrax Ascension platform lowers at the touch of a button, which solves the real problem with ceiling storage, namely that nobody wants to fetch a ladder in February.
Part of a national network, doing slatwall, cabinets and overhead storage. Their overhead racks are heavy gauge steel rated to hold up to 600 pounds, which comfortably covers winter tires, patio furniture and bins of seasonal gear. Also stocks wall-mounted tire racks and bike storage that mounts to the slatwall.
The Garage Store is a third option, carrying Proslat, Onrax and Hayley overhead systems plus bike lifts. One thing to settle before you order: garage shelving deeper than 24 inches will clip a car door in a standard bay, and people usually discover that after installation.
| Project | Typical range | What that usually includes |
|---|---|---|
| Reach-in closet, 5 to 6 ft | $1,000 to $2,500 | Melamine panels, rods, shelving, install |
| Walk-in, standard | $2,500 to $5,000 | Hanging, shelving, a small bank of drawers |
| Walk-in, large or luxury | $5,000 to $15,000+ | Island, shoe wall, premium finishes |
| Pantry or mudroom | $1,500 to $4,500 | Bench, cubbies, adjustable shelving |
| Garage system, two-car | $1,200 to $5,000 | Slatwall or shelving, overhead racks, install |
| Frameless shower, single door | $1,500 to $4,000 | 10mm glass, hardware, measure and install |
| Custom mirror, wall size | $300 to $1,200 | Cut to size, delivered and mounted |
Closet shops price by the linear foot of wall the system covers, roughly $60 to $150 installed for melamine and $25 to $60 for wire. Drawers are the biggest single jump: each box adds $150 to $400 once you count the slides, so a bank of six can quietly double a small closet. Installation alone often accounts for 20 to 50 percent of the total, and accessories such as valet rods, pull-out racks and jewellery trays run $50 to $500 each.
Most disappointing closets are not badly built. They are badly proportioned. Closet shelving and hanging space only work at the right heights and depths, and these are the numbers that fix that.
| Element | Measurement | Important |
|---|---|---|
| Single rod height | 66 in standard | Range of 60 to 72 by garment length |
| Double rod, upper | 80 to 84 in | Shirts, jackets, folded trousers |
| Double rod, lower | 40 to 42 in | Leaves clearance under the upper row |
| Rod distance from back wall | 12 in | Centred in a 24 in closet |
| Gap from rod to shelf above | 2 to 3 in | Less and hangers will not lift off |
| Shelf depth, folded items | 12 to 14 in | Deeper and the back row disappears |
| Vertical spacing, folded | 12 to 16 in | Taller stacks topple |
| Vertical spacing, shoes | 6 to 7 in | Boots need their own bay |
| Walk-in walkway | 36 in minimum | 42 in if drawers open into it |
| Reach-in depth | 24 in minimum | Below that a hanger sits at an angle |
The mistake we saw most often is one rod at builder height with a single shelf above. In a standard reach-in that leaves close to half the volume doing nothing. Splitting the run into a double-hang section and a shelf tower usually buys more capacity than moving to a bigger closet.
| System | Rated load | Best use |
|---|---|---|
| PVC slatwall | 75 lb per linear foot | Tools and gear you rearrange often |
| Aluminium-core slatwall | Up to 200 lb per sq ft | E-bikes, loaded tool chests |
| Fixed steel shelving | Hundreds of lb per shelf | Tires, paint, bulk storage |
| Overhead racks | Up to 600 lb per rack | Seasonal bins you touch twice a year |
Every one of those ratings assumes the panel or upright is screwed into studs. Standard PVC slatwall is built for 16-inch stud centres and aluminium-core panels for 24 inches. Fasten either to drywall anchors and the number means nothing. Overhead racks have to catch ceiling joists for the same reason.
Material choice matters more here than anywhere else in the house. An unheated Calgary garage swings from plus 20 in the afternoon to minus 30 overnight, over and over. Particleboard and unsealed MDF take on moisture, swell at the edges and never recover. Adhesive-mounted hooks let go well before minus 10. Road salt tracked in over winter eats untreated steel from the bottom up. What holds is powder-coated or galvanised steel, sealed plywood, PVC slatwall and anything fastened mechanically rather than glued. If a garage quote lists melamine, ask what happens to the edges in February.
| Thickness | Weight | Typical use | What to check |
|---|---|---|---|
| 5mm | About 2.6 lb per sq ft | Framed doors, tub enclosures | Frame colour and seal quality |
| 6mm | About 3.1 lb per sq ft | Semi-frameless, sliders | Roller hardware quality |
| 10mm | About 5.1 lb per sq ft | Frameless doors and panels | Wall blocking behind the hinges |
A 30 by 70-inch frameless door in 10mm weighs roughly 75 pounds, and all of it hangs off two or three hinges. That load needs solid blocking behind the tile, which is easy during a renovation and awkward afterwards, so raise it before the walls close up. Any glass in a wet area has to be tempered, and coatings like ShowerGuard or Endurshield are worth asking about if your water is hard, since they cut down on the mineral film that turns clear glass cloudy.
| Stage | Typical time | What delays it |
|---|---|---|
| Consultation and design | Same week | Not much |
| Site measure | 1 to 2 weeks out | Spring and pre-holiday backlogs |
| Manufacturing | 2 to 5 weeks | Custom finishes, imported hardware |
| Installation | Half a day to two days | Walls out of square, missing blocking |
Six to eight weeks from first call to finished closet is normal, and shower glass usually runs shorter because there is less to build. Keep the deposit modest and tie the balance to completed installation rather than to delivery of materials. A shop holding both your money and your panels has very little pressure to finish.
The quotes that cause trouble later are the ones with a single line and a single number. Before signing, check the paperwork answers this:
Ask for photos of finished work in a home the same age as yours. Calgary has plenty of 1970s bungalows with walls nowhere near square, and how a shop handles that tells you more than any brochure.
A standard one runs $2,500 to $5,000. Large builds with an island, a shoe wall and premium finishes reach $15,000 and beyond.
Usually not. Most shops sit on one side or the other. Regal Shelf & Mirror is the exception on our list, handling shelving and glass together.
Yes. Properly anchored wire is rated at 50 to 100 pounds per linear foot, more than most melamine. Its weakness is folded clothing slotting through the gaps, not load.
Sixty-six inches for a single rod. For double-hang, put the upper at 80 to 84 and the lower at 40 to 42, and keep the rod 12 inches off the back wall.
For a frameless door, yes, since the thickness is what lets it stand without a frame. For a framed or sliding enclosure the frame carries the load and 6mm is plenty.
A basic reach-in system runs $1,000 to $2,500 installed. Shops quote by the linear foot, roughly $60 to $150 for melamine and $25 to $60 for wire.
PVC panels are rated around 75 pounds per linear foot, aluminium-core panels up to 200 pounds per square foot. Both figures assume the panel is screwed into studs.
Company details were checked in August 2026 against each firm’s own published information. Cost ranges come from published Calgary price guides and Canadian cost data. Load ratings come from manufacturer specifications. Prices, hours and availability change, so confirm anything that matters to your budget with the shop directly.